Spa Heater 3kW Swim Fun Accessories 1057

Recommended for use as frost protection and supplementary heat source in spas (wilderness baths, hot tubs) and other smaller pools under 1000 litres. The heater has a built-in flow-switch circulation switch, which switches off the water heater if the water flow suddenly stops. Can be used both indoors and outdoors. Outdoors, the heater must be placed in a waterproof box. Also remember to insulate with a thermal cover for outdoor use. See back for technical specifications and kW.
In a basin of 1,000 litres, the water is heated with approx. 1 degree per hour. This is provided that the pool is covered with a thermal cover. (Measured with an ambient temperature of between 2 and -5 degrees).
The water heater is equipped with a simple adjustable thermostat of 0 - 45 C and Flow Switch. The Flow Switch ensures that the water heater automatically switches off when the circulation from the installed pump stops. 50 mm glue sleeve on inlet and outlet. Heating power: 3000 W. 16 Amp. 230V/50-60 HZ
The heater must be installed by a professional installer who is qualified for hydrotherapy bath installations.

Note:
1. This electric heater is a professional device which is supplied without a plug on the cord. It is recommended that installation be carried out by an authorized electrician.
2. The water heater has a built-in circulation protection and can therefore only work when the circulation pump causes the water to flow through the heater at more than 3600 liters per hour.


Specification
Effect; 3 kW
Voltage; AC 220-240 V, 50/60 Hz
Amps; 16A
Max pressure, MPa; 0.035
Classification; IP45
Heating of 1000 L; 1.0 ºC per hour
Under optimal conditions, the spa heater can heat the spa water up to 45 C.

Number of cartons: 1
Weight (approximately): 2.7 kg